Build Your Own Solar Panel

DIY solar panels are a great way to make your place energy efficient without spending much on installation.  With recent developments in solar technologies, it is now possible to power the entire house with solar panels and reduce energy costs. But usually, pre-built solar panels are expensive, which is why not many can afford these. On the contrary, DIY solar panels are far more reasonably priced and cost a fraction of what the pre-built ones do. These are also quite easy to build and do not require any special skills or tools. So if you are thinking to build your own DIY solar panels, here is how it can be done.

Get the Right Tools

Before you begin working on the solar panel, make sure that you have the right tools with you. To build a solar panel, you will require silicone caulk and wood glue. Also, get hold of some wire cutters, wire strippers, a soldering iron and solder for wiring purposes. All of these tools are available in local hardware stores easily.

Get Solar Cells

This is the first important step involved in the process of building DIY solar panels. A standard 3×6 inches solar cell produces 0.5 volt and almost 3.5 amps of power. A typical panel generates 18 volts and requires 36 cells for each panel that you want to build. A lot depends on the quality of cells that you buy. Therefore, be careful of buying low quality solar cells as these will produce less power than better or high quality ones. Also, remember to inspect the cells before buying to avoid having ones with broken edges, damaged surfaces and other problems. Usually, solar cells come in a lot of 36, 100 or 108 cells. It is highly suggested to get pre-tabbed cells for these can be wired easily later. You can get these cells from local solar companies or the internet with sites such as eBay selling them.

Make the Box

The next step is to build a container that can hold these cells. This box can be made out of any material, but wood is mostly preferred. Cut any wood you have in the shape of a box with a Plexiglas cover and a hole for wires to pass through. Attach the cells to another piece of wood and place it in the box.

Wire the Cells

You now need to wire and solder 36 cells together in a series for your DIY solar panels. Having pre-tabbed cells saves much time and effort in doing that, but if you don’t have these, then you need to solder your cells on a diode. A diode will help you control the flow of your panel in one direction and storing power at night when there is no sunlight.

Finish off the Panel

The final step involves attaching the cells in the panel with the help of silicone caulk. Always apply enough caulk to the middle back of each cell. In the end, screw the box and take it out in direct sunlight for testing with a voltmeter. Attach the voltmeter with the panel and see if it reads between 18 and 20 volts. This ensures that your panel is built properly. The whole process to build your own DIY solar panels will cost you around $120/ each, which is almost 50-70% less than buying a pre-made one.